Addressable Fire Panels

Advance Mxpro 5

MxPro 5 is our highest performance, analogue addressable fire panel and is approved to EN54 Parts 2, 4 and 13.  It is also certified by FM approvals to EN54 Parts 2 and 4.

Advance Mxpro 5 range 1-4 loops

It is the result of decades of fire alarm and detection experience and a research and development involving installers, specifiers, consultants and end users across the world.

MxPro 5 has been designed to offer more power and performance in a user-friendly enclosure. It packs more configuration, display, status and control options into its interface as standard than any other Advanced fire panel, which means less time and expense customising a system with peripherals.

MxPro 5 is also compatible with AlarmCalm, the fire alarm false alarm management solution from Advanced.

Kentec Syncro AS

It combines compact and practical styling with the programming power and connectivity normally associated with much larger systems.

Being a multi-protocol panel, enabling choice to our customers, Syncro AS supports Apollo, Argus Vega and Hochiki detection, making it ideal for small and medium sites that require advanced fire sensing and evacuation options. It can be expanded and networked to become part of much larger systems if the need arises, therefore providing a future proof solution for any size of installation.

Syncro AS is also available as a Lite version offering a cost-effective solution for smaller standalone installations requiring only one detection loop.

The Ziton ZP3

The Ziton ZP3 is an analogue addressable fire detection and alarm system, based on advanced technology and supported by highly configurable software. Advanced panel design, combined with high sensitivity smoke and fire sensing, enables ZP3 not only to identify and disregard conditions, which would result in false or unwanted alarms – but to recognise real fires sooner. Scaleable in every aspect, the ZP3 system offers tailor made engineered solutions for all applications, from single panel systems to large multi panel networks. Control panels are available in 1, 2, and 4 loop sizes, accommodating up to 508 sensing addresses. For sites requiring above four loops, panels can be networked together to form systems capable of controlling over 32000 devices from 64 control panels.

Notifier Fire Panel

Range from 1 loop ID60 ,ID 61 to ID3000 2-8 loop

The ID3000 can be configured to control a system of between 2 and 8 addressable loops. Each loop can support up to 198 devices (99 detectors + 99 call points / interfaces / AV devices) with a total of up to 255 zones per panel.

The ID3000 is designed in a modular fashion to allow for a wide range of applications, facilitating installation and servicing whilst making the ID3000 very easy to tailor to the requirements of the application. This combined with the full range of intelligent sensors, advanced detection products, input and output devices, repeaters, mimic drivers, printers and other peripherals available from Notifier bring you the most complete and versatile fire alarm system in the market place.

C-Tec XFP501/H XFP Addressable Single Loop 32 Zone Panel

C-TEC’s XFP single loop 32 zone addressable fire alarm panel offers high performance at a very competitive price. LPCB certified to EN54 parts 2 & 4, it is supplied in durable metal enclosure, offers combined keypad or keyswitch entry to Access Levels 2 and 3 and is compatible with Apollo’s XP95/Discovery and Hochiki protocol.

Ideal for use in small stand-alone applications or in larger applications due to its ability to sit on network of up to 8 XFP master panels, it is one of Europe’s best-selling addressable fire panels. Packed full of engineering features – please refer to the feature list below – the XFP501/X is also fully compatible with C-TEC’s Hush Button fire alarm solution and its new range of EN54 certified addressable sounders and VADs.

Conventional Fire Panels

Kentec Sigma CP

Easy to install, the Sigma CP is available with two, four or eight detection zones in standard or installation saving, ‘two-wire’ versions.

The extensive range of configuration features available ensure suitability for new installations or panel replacements on older systems.

Configuration options are stored in non-volatile memory and are easily accessed via an intuitive user interface, which enables the configuration data to be viewed and changed efficiently.

Sigma CP control panels are compatible with most standard, conventional detectors, call points and sounders and are also compatible with ‘two wire’ detector bases from Apollo and Hochiki.

CFP Standard 2-8 Zone Conventional

LPCB certified to EN54-2/4/8, C-TEC’s CFP   conventional fire alarm panel offers an array of user and installer-friendly features at a very competitive price.

Supplied in an attractive flush or surface mountable plastic enclosure, it includes four detector zones, four conventional sounder circuits, class change and alert inputs, on-board fire and fault relays and combined keypad/key switch entry.

A wide range of engineering functions are also provided including selectable zone delays, coincidence and non-latching zone facilities. Comprehensive test and fault-finding facilities are also provided.

Optional repeaters, relay expansion boards and EN54-13 system compliance devices are also available.

Vimpex Hydrosense HS Conventional 2 Zone Leak Detection Panel 230v AC

The new Hydrosense systems provide both linear detection using Hydrowire and point detection using probes. Linear detection Hydrowire is a flexible cable which will continuously monitor large areas. When even a small amount of water or moisture comes into contact with Hydrowire it will trigger an alarm. Point detection is provided by Hydrosense floor or drip tray probes, these are fixed to the floor or drip tray and adjusted to give the required detection level and connected to the control panel via a Hydrosense water leak detection module.

Utilising life safety technology in the design of Hydrosense provides the reliability and integrity of BSi approved fire detection systems, meaning there is virtually no risk of failure, downtime and significantly fewer false alarms.

Vimpex – Water Detection

Linear detection is provided by Hydrowire moisture sensitive cables, which are connected to the control panel via a special Connection Box using a simple two core leader cable, making installation quick and inexpensive.

Available as standard 5 and 10 metre lengths pre-terminated with DIN plugs, Hydrowire is a flexible cable which will continuously monitor large areas. When even a small amount of water or mois­ture comes into contact with Hydrowire it will trigger an alarm. Hydrowire will dry out in around 20 minutes for use again. Each zone requires a junction box and an end of line plug. For areas where continuous detection is not required zone breaker cables are available.

Vimpex – Floor Mounted Probe

Point detection is provided by Floor, Drip Tray Probes and Float Switches – all connected to the control panel by simple two core leader cable. The Floor Probe is fixed to the floor and adjusted to give the required detection level and connected to the control panel via a junction box. The Drip Tray Probe has exactly the same facilities as the Floor Probe but has a bracket for mounting onto the side of an ACU drip tray. The Float Switch alarm is for use in sump pumps, basements, etc.