Smoke Detector Products

Safety Tech Fire can supply Hochiki, Apollo, Notifier, Ziton, Nittan, Vega, Eaton products.

Smoke detectors

Smoke Detector COFEM with approved EN 54-7
(Hochiki, Apollo, Notifier, Ziton, Nittan, Vega, Eaton)

A smoke detector is a device that senses smoke, typically as an indicator of fire. Commercial security devices issue a signal to a fire alarm control panel as part of a fire alarm system, while household smoke detectors, also known as smoke alarms, generally issue a local audible or visual alarm from the detector itself.

Heat detector

A residential heat detector

A heat detector is a fire alarm device designed to respond when the convected thermal energy of a fire increases the temperature of a heat sensitive element. The thermal mass and conductivity of the element regulate the rate flow of heat into the element. All heat detectors have this thermal lag. Heat detectors have two main classifications of operation, “rate-of-rise” and “fixed temperature”. The heat detector is used to help in the reduction of damaged property. It is triggered when temperature increases.

Multi sensor

A Multisensor Detector consists of optical smoke and thermistor temperature sensors which give both a combined signal as well as a separate heat signal for improved false alarm management.

Fire alarm wall sounder

A fire alarm system has a number of devices working together to detect and warn people through visual and audio appliances when smoke, fire, carbon monoxide or other emergencies are present. … Alarms can be either motorized bells or wall mountable sounders or horns.

Flashni sounder

Fire Alarm Combined Sounder Beacons. The Fire Alarm Sounder Beacon range includes products with an electronic siren and flashing strobe combined into one unit. These products are 3rd party approved and ideal for use on fire alarm systems.

Break glass unit

Colloquially known as a “break glass” point, manual call points allow building occupants to signal that a fire or other emergency exists within the building. MCPs are connected to a central fire alarm control panel that can set of the alarm sounders in the building.

Loop based sounders

When the sounders are activated, the loop is driven from both ends ensuring that all sounders will remain operational even in the event of a single short-circuit or open-circuit fault. Sounders and their isolator bases are installed just like any other conventional sounders on the twin core circuit.

Flashing loop based sounders

The Sounder Visual Indicator Base is a loop-powered sounder and visual indicator combined with a standard Intelligent Mounting Base. It is used to signal a fire alarm in enclosed areas